Evaluation of the liquid fuel spray parameters based on experimental research and numerical simulation for the piezoelectric injectors

Authors

  • Krzysztof Wisłocki Poznań University of Technology, Poznań, Poland Author
  • Ireneusz Pielecha Poznań University of Technology, Poznań, Poland Author
  • Jakub Czajka Poznań University of Technology, Poznań, Poland Author
  • Dmytro Maslennikov Poznań University of Technology, Poznań, Poland Author

DOI:

https://doi.org/10.2478/v10174-011-0008-7

Keywords:

fuel injection, simulation method, optical research

Abstract

The paper presents an attempt to apply a simulation method in the investigations into liquid fuel atomization generated from piezoelectric gasoline injectors used in modern high-pressure injection systems. Individual stages of the simulation research have been discussed and an experimental verification of the method has been carried out. The results of the simulation and experimental research of the injection of liquid fuel have been presented in the form of influence of air backpressure on the fuel spray atomization and fuel propagation.

References

AVL FIRE ver. 2009, ICE Physics&Chemistry. AVL Graz 2009.

Befrui B., Corbinelli G., Robart D., Reckers W., Luxembourg G.D.: LES Simulation of the Internal Flow and Near-Field Spray Structure of an Outward-Opening GDi Injector and Comparison with Imaging Data, SAE Technical Paper 2008-01-0137.

Davis 7.2. LaVision, G¨ottingen, Niemcy. www.lavision.de

Dukowicz J.K.: A Particle-Fluid Numerical Model for Liquid Sprays, J. Comp. Physics, 35, 229-253, 1980.

Iyer C.O., Han Z., Yi J.: CFD Modeling of a Vortex Induced Stratification Combustion (VISC) System, SAE Technical Paper 2004-01-0550.

Kim S.-J., Kim Y.-N., Lee J.-H.: Analysis of the In-Cylinder Flow, Mixture Formation and Combustion Processes in a Spray-Guided GDI Engine, SAE Technical Paper 2008-01-0142.

Lohfink C., Baecker H., Tichy M.: Experimental Investigation on Catalyst-Heating Strategies and Potential of GDI Combustion Systems, SAE Technical Paper 2008-01-2517.

Schwarz Ch., Schünemann E., Durst B., Fischer J., Witt A.: Potentials of the Spray-Guided BMW DI Combustion System, SAE Technical Paper 2008-01-1265.

Szpica D.: Simulation tests on air flow through selected types of throttle bodies, Combustion Engineers, PTNSS-2010-SS1-105, 1/2010 (140).

Wisłocki K., Pielecha I., Czajka J., Maslennikov D., Kaźmierowski J.: Ocena przydatności maszyny pojedynczego cyklu do optycznych badan procesu wtrysku i spalania paliw ciekłych. Combustion Engines Magazine (143) 4/2010.

Wisłocki K., Pielecha I., Czajka J., Maslennikov D.: The Influence of Fuel Injection Parameters on the Indexes of Fuel Atomization Quality for a High Pressure Injection, SAE Technical Paper 2010-01-1499.

Wisłocki K., Pielecha I., Czajka J., Maslennikov D.: The qualitative spray characteristics of high pressure gasoline injection system. ILASS - Europe 2010, 23rd Annual Conference on Liquid Atomization and Spray Systems, Brno, 6-8.9.2010.

Wisłocki K., Pielecha I., Maslennikov D.: Optical Research of Spray Development of E85 Fuel in High Pressure Gasoline Direct Injection System, SAE Paper 2010-01-2285.

Downloads

Published

2011-03-31

Issue

Section

Original articles

How to Cite

Wisłocki, K., Pielecha, I., Czajka, J., & Maslennikov, D. (2011). Evaluation of the liquid fuel spray parameters based on experimental research and numerical simulation for the piezoelectric injectors. Archives of Transport, 23(1), 111-121. https://doi.org/10.2478/v10174-011-0008-7

Share

Similar Articles

1-10 of 312

You may also start an advanced similarity search for this article.